Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic Lumix DMC-FX100 Operating Instructions Manual

Advanced (Recording pictures)
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P47 to 53 and "About the
information " for details about each
scene mode.
1 Press 1 for the [SCENE MODE]
menu.
2 Press 3/4/2/1 to select the
scene mode.
• Press 4 at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3 Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
46
VQT1F52
A
• Press [MENU/SET] and then perform
1 2
steps , and
mode.
∫ About the information
• If you press [DISPLAY] when selecting a
scene mode in step
each scene mode are displayed. (If you
press [DISPLAY] again, the screen
returns to the [SCENE MODE] menu.)
• Refer to P40 for information about the
shutter speed.
• The flash setting is memorized even if the
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
• When you take a picture with a scene
mode that is not adequate for the
purpose, the hue of the picture may differ
from the actual scene.
• If you press 2 when selecting
[PORTRAIT] or [HI-SPEED BURST] in
2
step , the [SCENE MODE] menu [
selected. If you then select either the
[REC] menu [ ] or the [SETUP] menu
[ ], you can set the desired items.
• The following items cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [SENSITIVITY]
– [METERING MODE]
– [COL.EFFECT]
– [PICT.ADJ.]
3
to change the scene
2
, explanations about
] is