[Burst] - Panasonic Lumix DMC-FX100 Operating Instructions Manual

[BURST]

Taking Pictures using Burst
Press [ ] to display the [REC] mode
MENU
/SET
menu and select the item to set. (P59)
∫ Number of pictures recorded in burst
mode
Burst speed
(pictures/
second)
¢
2
approx. 1
¢ The burst speed is constant regardless
of the transfer speed of the card.
• The number of pictures indicated is when
the shutter speed is faster than 1/60 and
the flash is not activated.
• The burst speed (pictures/second) may
become slower depending on the
recording environment such as in dark
places, if the ISO sensitivity is high etc.
• If you take pictures in burst mode with the
built-in memory, it will take time to write
the picture data.
• Hold down the shutter button fully to
activate the burst mode.
• You can have higher speed burst if you
use [HI-SPEED BURST] in scene mode.
Refer to P51 for information about
[HI-SPEED BURST].
• When the burst mode setting is set to
Unlimited
– The burst speed becomes slower
halfway. The exact timing of this
depends on the type of card, the picture
size and the quality.
– You can take pictures until the capacity
of the built-in memory or the card is full.
Number of recordable
pictures (pictures)
max. 3 max. 5
Depends on the
remaining capacity of the
built-in memory/card.
• The focus is fixed when the first picture is
taken.
• The exposure and the white balance vary
depending on the burst mode setting.
When burst mode is set to [
fixed to the values set for the first picture.
When the burst speed is set to [
are adjusted each time you take a picture.
• If you are following a moving subject while
taking pictures in a place (landscape)
indoors, outdoors etc. where there is a
large difference between the light and
shade, it may take time until the exposure
is stable. If burst is used at this time, the
exposure may not become optimal.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• Burst mode is not canceled when the
camera is switched off.
• When auto bracket and burst mode are
set simultaneously, auto bracket will be
performed.
• When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When burst mode is activated,
[AUDIO REC.] cannot be used.
• When the flash is activated, you can take
only 1 picture.
• Burst mode cannot be set in simple mode
[ ] and [STARRY SKY] in scene mode.
Advanced (Recording pictures)
], they are
], they
VQT1F52
67