Selecting Listening Modes - Onkyo TX-SR602 Instruction Manual

Basic Operation —Continued

Selecting Listening Modes

See "About the Listening Modes" on page 62 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver
STEREO
PURE AUDIO LISTENING MODE
■ [PURE AUDIO] button (not American
TX-SR602)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
These buttons select all the listening modes that can
be used with the current input source.
Modes can be selected in the following order,
depending on the input signal format:
➔ ➔
Pure Audio Direct
PLIIx, Neo:6, Dolby D EX, DTS/DTS 96/24, DTS-
➔
ES, and so on) Onkyo original DSP
60
] [ ] buttons
➔
Mono Surround (e.g.,
Selecting with the Remote Controller
RC-588M
SURR
PURE A
DIRECT
RC-590M/591M
SURR
PURE A
(not
RC-590M)
DIRECT
■ [SURR] button
This button selects the Dolby Digital, Pro Logic IIx,
Neo:6, DTS, and other listening modes.
■ [All ST] button
This button selects the All Ch Stereo listening mode.
■ [THX] button (TX-SR702/702E only)
This button selects the THX listening modes.
■ [STEREO] button
This button selects the Stereo listening mode.
■ [PURE A] button (not American TX-SR602)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [
DSP] & [DSP ] buttons
These buttons select the Onkyo original DSP modes.
ALL ST
THX
STEREO
DSP
DSP
ALL ST
STEREO
DSP
DSP