Table of Contents
Advertisement
First Time Setup —Continued
Minimum Speaker Impedance
(not American models)
This setting is not set automatically by the Automatic
Speaker Setup function (see page 39).
If the impedance of any of the connected speakers is 4
ohms or more, but less than 6 ohms, set the Minimum
Speaker Impedance to "4 ohms."
Note:
Before you change this setting, turn down the volume.
1
2, 3
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
44
2
ENTER
ENTER
3
ENTER
ENTER
2–4
4
1, 5
ENTER
5
Notes:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Use the Up and Down [
]/[
buttons to select "1. Initial
Setup," and then press [ENTER].
The Initial Setup menu appears.
Use the Up and Down [
]/[
buttons to select "3. Hardware
Setup," and then press [ENTER].
The Hardware Setup menu appears.
Menu
------------------------
Basic Setup
1.Initial Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Digital Input
1-3.Hardware Setup
------------------------
2.Component Video
Advanced Setup
3.Hardware Setup
a.Powered Zone2
3.Surround Setup
:Not Activated
4.Audio Adjust
b.Sp Impedance Minimum
5.Listening Mode Preset
:6ohms
6.Preference
c.TV Format
:NTSC
d.AM Frequency Step
: 9kHz
(Menus vary depending on country.)
Use the Up and Down [
]/[
buttons to select "b. Sp Imped-
ance Minimum," and then use the
Left and Right [
]/[
] buttons to
select:
4 ohms: Select if the impedance of any
connected speaker is 4 ohms
or more, but less than 6 ohms.
6 ohms: Select if the impedances of all
connected speakers are
between 6 and 16 ohms.
Press the [SETUP] button.
The setup menu closes.
]
]
]
Hide quick links:
Advertisement
Table of Contents
