Onkyo TX-SR602 Instruction Manual page 59

Basic Operation —Continued
Displaying Radio Text (RT)
When tuned to an RDS station that's broadcasting RT
text information, that information can be displayed.
1
Press the [RT/PTY/TP] button
once.
The RT information scrolls across the
display.
Notes:
• The message "Waiting" may appear while the AV
receiver waits for RT information.
• If the message "No Text Data" appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
1 2
You can search for radio stations by type.
1 Use the [TUNER] input selector
button to select FM.
2
Press the [RT/PTY/TP] button
twice.
The current program type appears on
the display.
3
Use the PRESET [
to select the type of program you
want.
See the table on page 58.
4
1
5
Listening to Traffic News (TP)
You can search for TP radio stations.
1
4, 5 3
2
3
]/[ ] buttons
To start the search, press
[ENTER].
The AV receiver searches until it finds a
station of the type you specified, at
which point it stops briefly before con-
tinuing with the search.
When a station you want to listen
to is found, press [ENTER].
If no stations are found, the message
"Not Found" appears.
1 2 3
Use the [TUNER] input selector
button to select FM.
Press the [RT/PTY/TP] button
three times.
If the current radio station is broadcast-
ing TP (Traffic Program), "[TP]" will
appear on the display, and traffic news
will be heard as and when it's broad-
cast. If "TP" without square brackets
appears, this means that the station is
not broadcasting TP.
To locate a station that is broad-
casting TP, press [ENTER].
The AV receiver searches until it finds a
station that's broadcasting TP.
If no stations are found, the message
"Not Found" appears.
59