Olympus Stylus 1040 Instruction Manual page 24

Adjusting to a natural color scheme
[WB]
K CAMERA MENU
Submenu 2
AUTO
5
3
1
w
x
y
Selecting the ISO sensitivity [ISO]
K CAMERA MENU
In the ISO setting, although smaller values
result in less sensitivity, sharp images
can be taken under fully lit conditions.
Larger values result in higher sensitivity,
and images can be taken at fast shutter
speeds even under dimly lit conditions. High
sensitivity introduces electrical noise into the
resulting picture, which may give it a grainy
appearance.
Submenu 2
AUTO
50/100/200/400/
800/1600/3200
*1
When set to [3200], [IMAGE SIZE] is limited to [I]
*1
or lower.
24 EN
WB
K: P h s A
Application
The camera automatically adjusts
the white balance according to the
shooting scene.
For shooting outdoors under a
clear sky
For shooting outdoors under a
cloudy sky
For shooting under tungsten
lighting
For shooting under daylight
fl uorescent lighting (household
lighting, etc.)
For shooting under neutral
fl uorescent lighting (desk lamps,
etc.)
For shooting under white
fl uorescent lighting (offi ces, etc.)
ISO
Application
The camera automatically adjusts
the sensitivity according to the
shooting scene.
The ISO sensitivity is fi xed.
Shooting pictures sequentially while
the shutter button is held down [DRIVE]
K CAMERA MENU
Submenu 2
o
*1
O
The shooting speed varies depending on the
*1
settings for [D IMAGE QUALITY] (p. 23).
When set to [O], fl ash is fi xed at [$]
(FLASH OFF) and [ISO] is set to [AUTO].
When set to [O], [IMAGE SIZE] is limited
to [I] or lower. Moreover, [FINE ZOOM]
(p. 24), [DIGITAL ZOOM] (p. 25), and
[R (Still picture REC)] (p. 25) are not
available.
Shooting at higher magnifi cations than
optical zoom without reducing the
image quality [FINE ZOOM]
K CAMERA MENU
K: P
Submenu 2
OFF
ON
This function will not reduce the image
quality since it dose not convert the data
with fewer pixels into the data with larger
pixels.
When set to [ON], [IMAGE SIZE] is limited
to [H] or lower.
When [DIGITAL ZOOM] is set to [ON], this
setting is not available.
This function is not available when
[% SUPER MACRO] (p. 19) is selected.
DRIVE
K: P h
Application
One frame is shot each time the
shutter button is pressed.
Sequential shooting at a focus,
brightness (exposure) and white
balance that is locked in the fi rst
frame.
FINE ZOOM
K: P h s
Application
Only optical zoom is used to zoom
in for shooting.
Optical zoom and image cropping
are combined to zoom in for
shooting (up to 17×).