Changing The Monitor Display (Disp) - Olympus Stylus 800 Advanced Manual

Changing the monitor display (DISP)

This function displays histograms and lines that help you to compose your
pictures. Also, you can change the amount of information that is displayed
on the screen.
1
Press the DISP button repeatedly.
• Press the DISP button to change the display in the following order.
g"Direct buttons" (P. 11)
Displays the regular
shooting information.
For details on the
information displayed,
see "Monitor
indications" (P. 160).
+2.0 +2.0
1/200 1/200 F4.0 F4.0
ISO 400 ISO 400
4 4
×
HQ HQ 3264 3264 2448 2448
Displays only basic
information.
TIPS
How to read the histogram
1 If the peak fills too much of the frame, the image will
appear mostly black.
2 If the peak fills too much of the frame, the image will
appear mostly white.
3 The part indicated in green in the histogram shows
the luminance distribution within the AF target mark.
Note
• The histogram displayed during shooting may differ from the histogram
displayed during playback.
Displays horizontal and
vertical lines.
+2.0 +2.0
1/200 1/200 F4.0 F4.0
ISO 400 ISO 400
4 4
×
HQ HQ 3264 3264 2448 2448
4 4
HQ HQ
Displays a histogram
showing the luminance
distribution of the picture.
This screen is not
displayed in n mode.
Displays diagonal lines.
1/200 1/200
×
HQ HQ 3264 3264 2448 2448
+2.0 +2.0
1/200 1/200 F4.0 F4.0
ISO 400 ISO 400
4 4
×
3264 3264 2448 2448
1
3
4
+2.0 +2.0
F4.0 F4.0
ISO 400 ISO 400
4 4
2
61