Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Euroboor EBM.36+/P-18V
Summary of Contents for Euroboor EBM.36+/P-18V
- Page 1 User manual V 1.1 EN | Mar 2024 Cordless Magnetic drilling machine EBM.36+/P-18V...
- Page 2 Congratulations on purchasing this premium magnetic drilling machine. At EUROBOOR we strive to exceed our customers’ expectations by developing and providing premium and innovative portable drilling and cutting solutions. We believe that a professional like you must be able to rely on a professional supplier.
-
Page 3: Table Of Contents
Table of contents Safety ..............................4 1.1 General safety instructions ..........................4 Specific safety information for drilling ....................... 6 Description ............................. 8 Intended use ............................... 8 Description and features ..........................8 Case content ............................... 9 Serial number.............................. 9 Technical data ............................10 Symbols .............................. -
Page 4: Safety
1. Safety 1.1 General safety instructions Do not use this power tool before you have thoroughly read and completely understood this manual, specifically the “General safety instructions” and ‘’Specific safety information’’, including the figures, specifications, safety regulations and the signs indicating DANGER, WARNING and CAUTION. - Page 5 If you detect damage have the power tool serviced before use. Many accidents are caused by poorly maintained tools; 9. Only use accessories that are recommended by EUROBOOR for your power tool model. Accessories that are suitable for one power tool may become hazardous when used on...
-
Page 6: Specific Safety Information For Drilling
Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury; 3. EUROBOOR offers Armature kits containing official EUROBOOR spare parts suitable for your magnetic drilling machine. - Page 7 • Always use the recommended speed for the accessories and material you are working with; • Do not use the power tool on the same workpiece on which electric welders are working; • Only use an appropriate cutting lubricant. EUROBOOR offers a wide range of well-considered cooling and lubrication products to match your requirements;...
-
Page 8: Description
This cordless magnetic drilling machine is intended for commercial use as a drilling machine for drilling materials with a magnetisable surface using annular cutters in a weather-protected environment using the application tools and accessories recommended by EUROBOOR. The cordless magnetic drilling machine can only be used horizontally, vertically.or overhead. -
Page 9: Case Content
Additional serial no. stickers are provided with the machine for your administration. The serial number will help you, your dealer and EUROBOOR to validate and identify the machine. For example:... -
Page 10: Technical Data
2.5 Technical data Model EBM.36/P-18V Unit Metric Imperial Annular cutting Ø 12 - 36 mm Ø 7/16" - 1 7/16" Weldon twist drill Ø 1 - 13 mm Ø 1/16" - 1/2" Weldon Countersinking Ø 10 - 40 mm Ø 3/8" - 1 9/16" Length 325 mm 12 13/16"... -
Page 11: Symbols
Dimensions (inches) 2.6 Symbols Symbol Term, meaning Explanation Be sure to read the documentation in this user Read documentation manual and specifically the “General safety instructions” and ‘’Specific safety information’’ Wear ear protection Use ear protection during operation Wear eye protection Use eye protection during operation Indoor use only To identify electrical equipment designed for... - Page 12 Symbol Term, meaning Explanation European conformity Conformity with EEA machine regulations Product with basic insulation and exposed (touchable) conductive parts additionally Class of protection I connected to the protective earth conductor Able to function acceptably in its electromagnetic Electromagnetic Compatibility environment International Electrotechnical Conformity with international electrotechnical...
-
Page 13: Environmental
2.7 Environmental Separate collection. This product must not be disposed of with normal household waste. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. -
Page 14: Preparation & Adjustment
3. Preparation & adjustment 3.1 Assembly WARNING: To reduce the risk of injury,remove the battery pack from the power tool before installing and removing accessories, before adjusting or changing set- ups or when making repairs. Be sure all switches are in the OFF position. An accidental start-up can cause injury. - Page 15 In order to use the lubrication system, it must be filled with a sufficient amount of cutting fluid. 1. Make sure the flow regulator is closed; 2. Unscrew the cap; 3. Fill the container with cutting fluid; 4. Screw the cap back on. WARNING: Do not use the lubrication system in vertical drilling applications.
-
Page 16: Prior To Use
✓ Please make sure that the contacting surface for the permanent magnet base is level, clean and rust free. Remove any varnish or primer. When working on materials that are not magnetisable, suitable fixation devices, obtainable as accessories from EUROBOOR, e. g. suction plate, vacuum plate or pipe-drilling machine must be used. -
Page 17: Using The Machine
4. Using the machine WARNING: Always observe the safety instructions and applicable regulations. WARNING: To reduce the risk of serious personal injury, remove the battery pack from the machine before making any adjustments or removing/installing attachments or accessories. 4.1 Control panel The control panel on your magnetic drilling machine is designed for maximum ease of use and safety. -
Page 18: Permanent Magnetic Base
We want to point out that above mentioned precautions and indicators do not guarantee that the magnet will not release from the material. EUROBOOR accepts no liability when it comes to the magnet indicator not functioning or functioning poorly. -
Page 19: Switching Magnet On/Off
4.3 Switching magnet ON/OFF [image 4-4] [image 4-3] Activating the magnetic holding force by rotating the switch knob clockwisely,the magnet LED indicator lights up in green, to indicate that the magnetic holding force is sufficient for drilling. lightly Inactivating the magnetic holding force by press the switch knob ,the magnet LED indicator goes off ,to indicate that the magnetic holding force is off. -
Page 20: Gyro-Tec Safety
WARNING: Do not use the lubrication system in vertical drilling applications. Instead use EUROBOOR cutting paste or spray. Make sure to use only suitable cutting lubricants. EUROBOOR offers a wide range of cutting lubricants for all tool and material combinations. Proper lubrication will help you create better and faster results, and extend the lifetime of your tools. -
Page 21: Working With Drilling Accessories
5. Working with drilling accessories 5.1 Annular cutters Annular cutters only cut material at the periphery of the hole, rather than converting the entire hole to shavings. As a result, the energy required to make a hole is lower than for a twist drill. When drilling with an annular cutter, it is not necessary to drill a pilot hole. -
Page 22: Weldon Twist Drill
WARNING: The slug is sharp and may be hot! 5.2 Weldon twist drill Fit a Weldon shank twist drill (such as Euroboor SPI/SSPI-series) directly to the machin [image 5-2] 2. Precisely mark the center of the hole, and use the tip of the twist drill to position the machine and in the correct position, with the tip of the twist drill to meet the marked center of the hole. -
Page 23: Weldon Countersink
5.3 Weldon Countersink Thanks to its wide range of operating speeds, the machine can also be used for reaming or counter-sinking. Follow the steps mention in chapter Twist drills. 6. Battery pack and charger 6.1 Battery pack Read all instructions. Failure to follow all instructions listed below may result in, fire and/or injury. •... - Page 24 Obey your local regulations relating to disposal of battery BATTERY PROTECTION FEATURES EUROBOOR 18V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life. Under some operating conditions, these built-in features may cause the battery and the tool it is powering to act differently from nickel-cadmium batteries.
- Page 25 BATTERY CAPACITY INDICATOR By pressing the check button on the battery pack ,the user can check the remaining battery capacity by observing the indicator light. CAPACITY INDICATOR LIGHT CHECK BUTTON [image 6-1] Depending on the status of indicator light, the remaining capacity of battery can be read easily by the user: [image 6-2] Note: Depending on the ambient temperature, the indication may differ slightly from the real battery capacity.
-
Page 26: Battery Charger
Chlidren should be supervised to ensure that they do not play with the appliance. • Once the power cord damage,do not change it yourself,return it to euroboor dealer or ask a qualified person for help. WARNING: Do not charge non-rechargeable batteries. -
Page 27: Maintenance
5℃(41F)-40℃(104F).A long battery service life will be achieved in this manner. 7. Maintenance Your EUROBOOR magnetic drilling machine has been designed to operate over a long period of time. Continuous satisfactory operation depends upon proper tool care and regular cleaning. - Page 28 Repair, modification and inspection of EUROBOOR magnetic drilling machines must be done by EUROBOOR or an EUROBOOR authorised dealer. The spare parts list will be helpful if presented with the machine to the EUROBOOR dealer for service when requesting repair or other maintenance.
- Page 29 WARNING: Since accessories, other than those offered by EUROBOOR, have not been tested with this machine, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only EUROBOOR recommended accessories should be used with this machine.
-
Page 30: Trouble Shooting
8. Trouble shooting Permanent magnet does function, - Damaged or defective wiring the motor does not work - Defective battery pack - Defective On / Off switch - Defective control unit - Defective armature and/or field Annular cutters break quickly, holes - Clearance in the guide are bigger than the annular cutter - Bent spindle... -
Page 31: Exploded Views & Spare Parts List
9. Exploded views & spare parts list 9.1 Exploded views... -
Page 34: Sparepart Lists
9.2 Sparepart lists Part no. Description Part no. Description 018.1001 Motor set air.0009 018.0065 Screw ST4.2*45 air.0008 Adjustment handle 018.1007 Top cover set 018.1086Z Contorl-unit 018.1005 Housing set 018.0151 Four-core wire 018.0027 Cable housing 020.0146A Screw 018.0060 Screw M4*30 020.0106C Washer 018.1006 Armature set... -
Page 35: Wiring Diagram
9.3 Wiring diagram... -
Page 36: Warranty And Service
[ only when registered you benefit from extended warranty ] Service To maximise the lifetime of your EUROBOOR machine always use service and parts from an official EUROBOOR distribution channel. Whenever in need of such, always contact original point of sales or,...
Need help?
Do you have a question about the EBM.36+/P-18V and is the answer not in the manual?
Questions and answers