Olympus CAMEDIA C-5060 Wide Zoom Reference Manual page 20

(Monitor indications in shooting mode
Turn the power on and the monitor turns on diplaying the shooting
information. Each time you press f, the information display changes in
the following sequence.
TIPS
To display only the AF target mark (Display 3) when the power is
turned on.
The AF target mark can be displayed without pressing f by
following one of the methods below.
→ Turn the power off with the ALL RESET off, and the AF target
mark displayed (Display 3). g"ALL RESET – Saving the
camera's settings" (P.162)
→ Set ON
setting the dial to r. g"MY MODE SETUP – Setting a function
in My Mode" (P.170)
Display 1
After 3 sec.
Display 2
Press f
Display 3
Press f
OFF
for LCD in MY MODE setup. Turn the power on after
Names of parts
The shooting
information details
are displayed.
Only the AF target
mark is displayed.
19