Pixel Mapping - Checking The Image Processing; Functions - Olympus CAMEDIA C-5060 Wide Zoom Reference Manual

PIXEL MAPPING – Checking the image processing functions
• When the File No. reaches 9999, the file number returns to 0001
and the folder number changes.
• When both the Folder and File No. reach their respective maximum
Note
number (999/9999), the number of storable pictures becomes 0
even if the card is not full. No more pictures can be taken. Replace
the card with a new one.
PIXEL MAPPING – Checking the image processing functions
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a minute
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
Mode dial
1
In the top menu, select MODE
MENU → SETUP → PIXEL
MAPPING, and press d.
g"How to use the menus" (P.49)
• START appears.
8
2
Press e.
• The BUSY bar is displayed during Pixel
Mapping. When Pixel Mapping is finished,
the screen returns to the mode menu.
• If you accidentally turn the camera off during Pixel Mapping, start
again from Step 1.
Note
192
Arrow pad
OK button
BUSY