Advertisement
Quick Links
1. HubDuo Radio
2. Antennae (2)
3. Power Supply
4. Power Cord
5. (2) Ethernet Cables (1
shorter, 1 longer)
6. (2) Zip Ties (not shown)
7. (2) Screws (not shown)
Remove the door, write down the MAC address of
your Hub in the box below, and keep it with these
directions in a safe place:
If you don't have an account on AyrMesh.com, create
one now using a device connected to your network
(not a cellphone unless it's connected to your router
via WiFi):
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AYRSTONE AyrMesh HubDuo
Summary of Contents for AYRSTONE AyrMesh HubDuo
- Page 1 Remove the door, write down the MAC address of your Hub in the box below, and keep it with these 1. HubDuo Radio directions in a safe place: 2. Antennae (2) 3. Power Supply 4. Power Cord 5. (2) Ethernet Cables (1 shorter, 1 longer) 6.
- Page 2 Plug an Ethernet cable into either port on the Screw the antennae Hub - slide in until it clicks in place: gently onto the threads on the Hub - finger-tight (no tools): Use another Ethernet cable to connect the Click the other end of the Ethernet cable into LAN port of the power supply to one of the LAN the port on the Hub's power supply marked ports on your router.
- Page 3 Hub is checking in If it hasn't shown up after 5 minutes, try adding it manually: Click on the button that says "Manually add Ayrstone Device" and enter the MAC address All Hubs should be mounted outside, up as high as possible, with the antennae pointing straight up.
- Page 4 AyrMesh The AyrMesh HubDuo provides normal 802.11ac WiFi, just like any other WiFi access point. Unless you have changed it in your AyrMesh.com account, the default SSID is "AyrMesh"...
- Page 5 DHCP reservations instead to avoid IP address conflicts. - Check for network loops - commonly caused by devices with multiple ways to connect to the network (e.g. laptops, printers, or cameras with both Ethernet and WiFi) See http://support.ayrstone.com for additional information, hints, and troubleshooting tips.
- Page 6 These minimized directions are intended for more knowledgeable or experienced installers, or just for the impatient. Turn this booklet over for more in-depth instructions, and see https://support.ayrstone.com for additional information. GET READY: Write down the MAC address of the Hub in the box below and put it someplace safe.
Need help?
Do you have a question about the AyrMesh HubDuo and is the answer not in the manual?
Questions and answers