Getting Started; First Start-Up - Nokia 9110i Communicator User Manual

2. Getting started

This chapter explains how to start up your communicator and install a SIM
card, how the communicator operates, and how to supply power to the
communicator.
When you open the sales package, check that it contains the following:
• Nokia 9110i Communicator
• This User's manual, the combined Quick guide and Accessories guide,
Application Memory Card guide and the Solution guide
• Application Memory Card, which is already inserted into your communi-
cator. More information can be found in the Application Memory Card
guide.
• High Power Battery
• AC charger
• RS-232 Adapter Cable
• Diskette package
• CD-ROM with PC connectivity software
• Stickers with the serial number and the lock code of the communicator
For information about the Nokia 9110 or 9110i communicator accessories, see
the Accessories guide.

First start-up

1 Close the device cover and make sure that the phone is switched off. If it is
on, press .
A valid miniature SIM card is required for sending and receiving calls and
messages. The card is supplied by your network operator or service provider. If
you do not have a SIM card yet, go to step 6.
2 If the battery is connected to the communicator, remove the battery: press
the catch at the top of the battery and lift the battery away from the
battery cavity. See figure 1.
©2000 Nokia Mobile Phones. All rights reserved.
Note: Keep all miniature
SIM cards out of small
children's reach.
7