Nokia 9110i Communicator User Manual page 54

44
To store DTMF tones
For information on how to send DTMF tones, see "Multiple calls" on page 50,
or "To send DTMF tones" on page 138.
If you need both a voice and a DTMF phone number for the contact, store the
DTMF sequence in the Tel field, in which case the phone number and the DTMF
sequence must be separated by one of the special characters in table 1. Or add
a DTMF field to the contact card with the Add field command.
Character
* and #
p (pause)
w (wait)
To use the Menu button
Pressing the Menu button in an opened contact card opens a new set of
options:
Duplicate card — Creates a copy of the current card.
Copy contents — Copies the contents of the card to a clipboard. You can add
this information to documents by pressing Ctrl-V.
Next card — Opens the next contact card in the directory.
Previous card — Opens the previous contact card in the directory.
Fetch — If you have selected the URL field of a contact card with the selection
frame, pressing Fetch starts the WWW application and opens a connection to
the first URL address in the field.
Belongs to groups — Shows all the groups of which the current contact is a
member.
To view the contact information on your SIM card
1 Press the Menu button in the Contacts directory, and select the SIM card
memory option.
2 Select the contact with the selection frame and press Open.
To add a new contact to the SIM card memory, press New.
To remove the selected contact(s) from the SIM card memory, press Clear.
To return to the Contacts main view, press Close.
©2000 Nokia Mobile Phones. All rights reserved.
Function
May be used if the DTMF service requires them.
Inserts a pause of 2.5 seconds in front of, or between,
DTMF digits.
When the "w" character is stored in a sequence, the rest
of the sequence is not sent until you press Send again in
the Telephone application.
Table 1