Infrared Activation - Nokia 9110i Communicator User Manual

Infrared activation

If you want to use the PC Suite for Nokia 9110 Communicator program (see
"To use the PC Suite" on page 29) with the infrared connection, or if you want
to receive data from another device via the infrared, you need to use the
Infrared activation application.
1 Make sure that the infrared port of the communicator faces the infrared
port of the PC or another device.
2 Open the Infrared activation application on the communicator.
3 Press Activate.
4 To end the infrared connection, press Disable.
To transfer data between two communicators
1 Make sure that the infrared ports of the communicators face each other.
2 Open the Infrared activation application on the receiving communicator.
3 In the sending communicator, go to the application from where you want
to transfer data, and press Transfer via IR.
Note: The infrared connection in Windows
2000 and NT 4.0 is not compatible with the
communicator. When using these operating
systems, connection to the PC should be made
via cable, see "To use the PC Suite" on page 29.
Note: A maximum of 20
files can be transferred at
a time.
Tip: The infrared link can also
be activated by pressing Chr-1
on the communicator keyboard.
Note: Your phone is a
Class 1 Laser Product.
©2000 Nokia Mobile Phones. All rights reserved.
117