Table of Contents
Advertisement
The Smart Portrait Menu
• See "A Changing the Image Size (Image Mode)" (A 62) for information about
A Image mode.
• See "q/s/r Touch Shooting" (E 49) in "The Shooting Menu (for A (Auto)
Mode)" for information about qr Touch shooting.
e Skin Softening
Select F (smart portrait) mode M d tab M e Skin softening
Enable skin softening.
When the shutter is released, the camera detects one or more human faces (up to
three), and processes the image to soften facial skin tones before saving the image.
The degree of skin softening applied can be selected from S High, R Normal
(default setting), and Q Low.
• The effects of skin softening are not visible when framing pictures for shooting.
Check the degree of skin softening performed in playback mode.
d Blink Proof
Select F (smart portrait) mode M d tab M d Blink proof
When o On is selected, the camera automatically releases the shutter twice each time
a picture is taken. Of the two shots, one in which the subject's eyes are open is saved.
• If the camera saved a picture in which the
subject's eyes may have been closed, the
dialog shown on the right is displayed for a
few seconds.
• Flash cannot be used when o On is
selected.
• The default setting is p Off.
a Smile Timer
Select F (smart portrait) mode M d tab M a Smile timer
When o On (default setting) is selected, the camera detects human faces and
then automatically releases the shutter whenever a smile is detected.
• To enable the touch shutter, select p Off (E 51).
A blink was detected in the
picture just taken.
E61
Advertisement
Table of Contents
