Table of Contents
Advertisement
Using Easy Panorama (Shooting and Playback)
Move the camera slowly and straight
in one of the four directions, and
begin shooting.
• When the camera detects which direction it is
moving in, shooting begins.
• A guide indicating the current shooting
position is displayed.
• When the shooting position guide reaches
the edge, shooting ends.
Example of Camera Movement
• The operator, without shifting position, moves the camera horizontally or
vertically in an arc so that the guide travels from one edge to the other.
• Shooting stops if the guide does not reach the edge within about 15 seconds
(when C Normal (
B Wide (36 °) is selected) after shooting starts.
B
Notes on Easy Panorama Shooting
• The range of the image seen in the saved picture will be narrower than that seen in the monitor at
the time of shooting.
• If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or
darkness), an error may occur.
• If shooting is stopped before the camera reaches the half-way point in the panorama range, a
panorama picture is not saved.
• If more than half of the panorama range is captured but shooting ends before reaching the edge
of the range, the range not captured is recorded and displayed in gray.
C
Changing the Shooting Range
• When using easy panorama, tap the d tab, tap A, and tap either C Normal (
B Wide (36 °).
• When the camera is held in the horizontal position during shooting, the image size (width ×
height) is as follows.
- Normal (
°): 3200 × 560 when moved horizontally, 1024 × 3200 when moved vertically
- Wide (36 °): 6400 × 560 when moved horizontally, 1024 × 6400 when moved vertically
- When the camera is held in the vertical position during shooting, the direction and the width
and height are switched.
E4
°) is selected) or within about 30 seconds (when
Guide
°) or
Advertisement
Table of Contents
