Table of Contents
Advertisement
The Shooting Menu (for A (Auto) Mode)
B
Notes on Continuous Shooting
• When Continuous H, Continuous L, BSS, or Multi-shot 6 is selected, the flash is disabled.
Focus, exposure, and white balance are fixed at the values determined with the first picture in
each series.
• It may take some time to save the pictures after shooting. The amount of time it takes to finish
saving the pictures depends on the number of pictures, image mode, the write speed of the
memory card, etc.
• When ISO sensitivity increases, noise may appear in pictures taken.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When Multi-shot 6 is selected, banding or variance in brightness or hue may occur in pictures
that were taken under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or
sodium-vapor lighting.
• There are functions with which this setting cannot be enabled. See "Features That Cannot Be
Applied Simultaneously" (A 64) for more information.
B
Note on BSS
BSS is effective when taking pictures of still subjects. BSS may not produce the desired results if the
subject moves or the composition changes while the shutter-release button is held down.
C
Pictures Taken in Continuous Shooting Mode
Each time pictures are taken using Continuous H or Continuous L, the pictures are saved as a
"sequence" (E 17).
C
More Information
• See "Subjects Not Suitable for Autofocus" (A 29) for more information.
• See "Playing and Deleting Pictures Taken Continuously (Sequence)" (E 17) for more information.
E58
Advertisement
Table of Contents
