Table of Contents
Advertisement
Connecting the Camera to a Printer
Close the slide cover to turn off the camera.
2
Turn on the printer.
• Check printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4
The camera is automatically turned on.
• When properly connected, the PictBridge startup
screen ( 1 ) will be displayed in the camera monitor,
followed by the print selection screen ( 2 ).
1
B
If the PictBridge Startup Screen is not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E 92) in
the camera's setup menu to Off and reconnect the cable again.
Connecting the Camera to a Printer
2
15/11/2011
12 / 12
E39
Advertisement
Table of Contents
