Deleting A Bridge Interface; Configuring Global Firewall Settings - NetComm NB3 User Manual
Ethernet/usb adsl modem router
Hide thumbs
Also See for NB3:
- Instructions (3 pages) ,
- Specification sheet (2 pages) ,
- Firmware update (1 page)
Table of Contents
Advertisement
Deleting a Bridge Interface
To make an interface non-bridgeable, display the Bridge Configuration page and click next to the
interface you want to delete. Click OK to confirm the deletion. The interface remains defined in
the system, but is no longer capable of performing bridging.
Configuration Manager provides built-in firewall functions, enabling you to protect the system
against denial of service (DoS) attacks and other unwelcome or malicious accesses to your LAN.
You can also specify how to monitor attempted attacks, and who should be automatically
notified.
Configuring Global Firewall Settings
Follow these instructions to configure global firewall settings:
1. Log into Configuration Manager, click the Services tab, and then click Firewall in the task
bar.
The Firewall Configuration page displays, as shown in Figure 45.
2. Configure any of the following settings that display in the Firewall Global Information table:
Rev. 2 - YML680
NB3 My ADSL Modem User Guide
Figure 45. Firewall Configuration Page
www.netcomm.com.au
Page 129
Advertisement
Table of Contents
