NetComm NB3 Instructions

Bridge setup

Hide thumbs Also See for NB3:

NB3 Bridge Setup

Bridge configuration for your NB3 allows you to disable the routing function within the NB3.

This can be useful especially if you require to use the NB3 on a single PC and bypass the

NAT firewall for a live connection, or if you plan to use your NB3 in conjunction with a

separate Router.

You will need to perform this operation from the default settings as per below.

1) Log on to the Quick Configuration page as per Video Guides.

2) Simply change the

Encapsulation to 1483 Bridged IP LLC

VPI and VCI to 8 and 35

Bridge to Enabled

IGMP to Enabled

Default Route to Disabled

Then click Submit.

Table of Contents

Do you have a question about the NB3 and is the answer not in the manual?

Page 1 Bridge configuration for your NB3 allows you to disable the routing function within the NB3. This can be useful especially if you require to use the NB3 on a single PC and bypass the NAT firewall for a live connection, or if you plan to use your NB3 in conjunction with a separate Router.
Page 2 Click Add Saving your settings Regardless of the changes you make to your NB3 modem, if you want your settings to be permanent you will need to commit the settings and reboot the modem. To perform this operation, follow the outlined procedure (also refer to the picture):- Select the Admin tab.