Rear - NEC NP-P350W User Manual

Rear

Port Cover for
USB Wireless LAN Unit
When using the USB Wireless LAN
Unit, first remove the cover. (→
page 141)
Monaural Speaker (10 W)
Terminal Panel (→ page 7)
Connect the supplied power cord's
three-pin plug here, and plug the
other end into an active wall outlet.
(→ page 13)
Cable cover connection (right and
Screw holes and grooves for the
optional cable cover
* This security slot supports the MicroSaver
Opening and closing the lens cover
Slide the lens cover to the left to uncover the lens.
To cover the lens, slide the lens cover to the right.
NOTE:
• The lens cover works in conjunction with the AV mute function. Closing the lens cover will turn off the image and sound during
normal projector operation; opening it will restore the image and sound.
With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about
2 hours, it will turn off automatically.
• Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause
damage to the lens cover sliding mechanism!
AC Input
left)
Security System.
®
5
1. Introduction
Remote Sensor
(→ page 9)
Lamp Cover (→ page 148)
Built-in Security Slot ( )*
Security chain opening
Attach an anti-theft device.
The security chain opening accepts
security wires or chains up to 0.18
inch/4.6 mm in diameter.
Rear Foot (→ page 21)