Connecting Hdmi Input - NEC NP-P350W User Manual

Connecting HDMI Input

You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the
HDMI IN connector of your projector.
NOTE: The HDMI IN connector supports Plug & Play (DDC2B).
HDMI cable (not supplied)
Use High Speed HDMI
Cable.
Input connector
HDMI IN
TIP: For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI IN connector of the projector to the DVD player, the projector's video level can be
made settings in accordance with the DVD player's video level. In the menu select [HDMI SETTINGS] → [VIDEO
LEVEL] and make necessary settings.
If the HDMI input sound cannot be heard, in the menu select [HDMI SETTINGS] → [AUDIO SELECT] →
•
[HDMI].
®
HDMI
S-VIDEO VIDEO L
VIDEO OUT AUDIO OUT
HDMI OUT
HDMI Output
SOURCE button on the projector
cabinet
HDMI
6. Installation and Connections
HDMI IN
HDMI
R
Audio cable (not supplied)
Button on the remote control
137
AUDIO IN
L R
HDMI