NEC NP-P350W User Manual page 64

7. Input the password to the password input box displayed by the operation at step 3 on page 44.
8. Click [Connect].
The network projector function works and the screen of Windows 7 is projected from the projector.
• If the resolution of your computer's screen is different from the projector's screen resolution, the NETWORK
PROJECTOR function may not work. If this happens, change the resolution of the computer's screen to lower
resolution than the one displayed at Step 3 on page 44.
NOTE: When the network projector function works, the background color of the desktop changes to black. When the network
projector function is stopped, the original background color is restored.
Reference: If the projector cannot be found at Step 5, click [ → Enter the projector address]. Then, input the "Network address"
(Input example: http://10.32.97.61/lan) and "Projectorpassword" (Input example: 82291627) displayed in the screen projected
from the projector.
Exiting the Network Projector Operation
1. Click [Projecting: P420 Series] in the Windows Vista task bar.
2. Click [Disconnect].
The Network Projector function is stopped.
3. Press the SOURCE button of the projector to select an input terminal other than [NETWORK].
When using the remote control, press a button other than the NETWORK button.
46
3. Convenient Features