Rear/ Side Features - NEC MultiSync VT540JK User Manual

Rear/ Side Features

Remote Sensor
Card Remote Slot
Slot for Card Remote Control
The supplied card remote control can be stored in the cabinet.
To store the card remote control:
1. Insert the card remote control STRAIGHT into the slot.
2. Push the card remote control until it is into place.
To pull out the card remote control:
1. Push the bottom of the card remote control straight to eject the
card remote control.
2. Pull out the card remote control.
NOTE: Do not push or pull the card remote control in a slanting
direction. Unless you push the card remote control straight, you may
not eject the card remote control. Should this happen, try pushing the
card remote control straight again.
Attaching the lens cap to the lens hood with the sup-
plied string and rivet
1. Thread the string through the hole on the lens cap and then tie a
knot in the string.
2. Tie a knot again
3. Use the rivet to attach the string to the bottom of the lens hood.
E–9
Remote Sensor
Built-in Monaural Speaker (1W)
Rear Foot
Lamp Cover
Lamp Cover Screw
Rear Foot
Lens Cap
String
Rivet