Information Settings; About The Ipod Input Feature; Connecting The Optional "Nad Ipd 1 Dock With Ipod" And Ipod; Player To The T 785 - NAD T785 Owner's Manual

OPERATION
USING THE T 785 – AM/FM/DB/iPod

INFORMATION SETTINGS

While listening to a DAB broadcast, the type of information displayed in the
lower line of the VFD can be varied. Toggle front panel's [INFO] button to
step through the following display options:
Station Name
DLS
Channel and Frequency
Ensemble Name
Program Type
Time and Date
Audio Signal information
Error Rate
STATION NAME
The name or identification of the DAB broadcast station is shown. This is
the default display.
DLS
Dynamic Label Segment (DLS) is the scrolling text supplied by the
broadcasting station. It may contain information on music titles or details
regarding the program or station.
CHANNEL AND FREQUENCY
The channel and frequency of the currently tuned DAB broadcast are
displayed.
ENSEMBLE NAME
The name of the ensemble that is broadcasting the program is displayed.
PROGRAM TYPE
This is a description of the type of broadcast supplied by the station, such
as Pop, Rock, Drama and the likes.
TIME AND DATE
The current time and date as supplied by the DAB station are displayed.
AUDIO SIGNAL INFORMATION
Displays the bit rate and audio type (stereo, mono or joint stereo)
as transmitted by the DAB broadcast provider. These are set by the
broadcaster to suit the type and quality of material being transmitted.
ERROR RATE
This displays the digital error rate (0 to 99) of the currently tuned channel
- the lower the figure, the better the quality of the received broadcast.
4

ABOUT THE iPod INPUT FEATURE

The T 785 is equipped with a data port in the rear panel where an optional
"NAD IPD 1 Dock with iPod" (NAD IPD 1) can be plugged in. With the NAD
IPD 1 linking the T 785 with your own iPod player, you can enjoy listening
to your favorite tracks and playlists as well as view applicable still image and
video playback.
You can control your iPod player using the assigned buttons in the T 785
front panel. And with the corresponding HTRC 1 remote control function
keys, you can select the materials stored in your iPod for playback as well as
access many of its functions even from across the room. The optional NAD
IPD 1 also charges your iPod player while it is connected to the T 785.
NOTES
• NAD IPD 1 and iPod player are optional and not supplied with your
T 785.
• iPod player functions, features and playback capabilities accessible
through T 785 may vary depending on your iPod player model.
• When using the HTRC 1 to control the iPod functions, make sure that the
Device Selector is set to "AMP".
CONNECTING THE OPTIONAL "NAD IPD 1 DOCK WITH
iPod" AND iPod PLAYER TO THE T 785
Make sure that all the devices are unplugged before making the
connections.
1 Connect the NAD IPD 1's plug into the T 785's "MP DOCK" data port.
2 Connect also the NAD IPD 1's S-Video out and audio out to the T 785
Audio 5/Video 5 input (the default iPod source allocation in the T 785).
You can also connect both audio and video out connectors to any
available assignable input of the T 785.
3 Dock your iPod player into the NAD IPD 1.
NAVIGATING THE iPod PLAYER'S FUNCTIONS AND FEATURES
After linking together your iPod player, NAD IPD 1 and the T 785, you can
now plug them IN to their applicable power sources.
1 With your T 785, iPod player and NAD IPD 1 all at power ON state, select
SOURCE 5 of your T 785. Your iPod player will show in its display the NAD
logo and below it "OK to disconnect". On the other hand, the T 785 VFD will
show in the upper line "iPod Menu" and the lower line "Playlists". The lower
line will vary depending on the current menu selected. At the same time,
the T 785 OSD will display the whole iPod Menu selections like Playlists,
Artists, Albums, Songs, Podcasts, Genres, Composers and Audiobooks.
2 Navigate through the iPod menu selections using a combination of the
[ ] buttons.
NOTES
• The iPod player's click wheel and controls will not operate when it is
properly connected to the T 785 via the NAD IPD 1.
• To exit from the iPod Menu at Source 5, press [ ] bringing you to "Menu
Select" OSD. Follow the instructions as shown.