Station Order; Drc Value; Manual Scan; Prune List - NAD T785 Owner's Manual

STATION ORDER

Use "Station Order" to sort the sequence of the listed stations. There are
three orders – Alphanumeric, Ensemble and Active.
1 While listening to a DAB broadcast, press front panel's [TUNER MODE]
button and then [TUNE /
[ENTER].
2 Toggle [TUNE
/ ] to select through "Alphanumeric", "Ensemble"
and "Active".
3 Press [ENTER] to select desired station order.
ALPHANUMERIC
This is the default setting. Stations are arranged by numbers first and then
alphabetically by letters.
ENSEMBLE
Digital radio is broadcast as groups of data called ensemble. Each ensemble
contains a number of stations, transmitted at a set frequency. When
"Ensemble" is selected as the mode of station order, the radio stations are
arranged in the order of their ensemble names.
NOTE
Ensemble is also interchangeably termed as "multiplex" by other
broadcast providers.
ACTIVE
Active stations are listed at the top of the channel list. Those channels
that are in list but have no service in the area will be displayed last in the
channel list.
DRC
The level of compression of stations can be set to eliminate the differences
in dynamic range or sound level between radio stations. Popular music
would normally be more compressed than classical music, resulting in
possible different audio levels when changing from one station to the
other. Setting the DRC to "0" means no compression, "1/2" indicates medium
compression and "1" shows maximum compression. No compression is
recommended, especially for classical music.
1 While listening to a DAB broadcast, press front panel's [TUNER MODE]
button and then [TUNE /
2 Toggle [TUNE / ] to select through "DRC 0", "DRC ½"and "DRC 1".
3 Press [ENTER] to select desired DRC level.
] to select "Station Order". Press
] to select "DRC". Press [ENTER].
USING THE T 785 – AM/FM/DB/iPod

MANUAL SCAN

This option allows you to directly tune to a desired channel and include it
in the service list (if not yet available at the time). You can also use manual
scan to assist you in positioning the DAB antenna for best reception of the
desired channel.
1 While listening to a DAB broadcast, press front panel's [TUNER MODE]
button and then [TUNE /
[ENTER]. The current channel and frequency are shown in the upper line
of the VFD. The "bars" at the lower line of the VFD indicate the signal
strength level of the current channel.
2 To select other channels, toggle [TUNE
channel list. Release [TUNE /
desired channel. Channel and frequency are shown in the upper line
of the VFD. The "bars" at the lower line of the VFD indicate the signal
strength level of the current channel. To improve the reception of the
selected channel, adjust or reposition the DAB antenna until the best
reception is indicated.
3 Press [ENTER] to tune the selected channel.
NOTE
The number of ensembles and stations that could be scanned will vary
depending on your location.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The
"Prune List" option enables the deletion of these inactive stations in the
service list.
1 While listening to a DAB broadcast, press front panel's [TUNER MODE]
button and then [TUNE /
2 Press [ENTER]. Any inactive stations are automatically deleted.

RESET

The "Reset" option allows the connected (and separately sold) NAD DAB
Adaptor DB1 to be reset to its factory default settings.
1 While listening to a DAB broadcast, press front panel's [TUNER MODE]
button and then [TUNE /
2 Press [ENTER]. "Reset? No" will be shown in the lower line of the VFD.
Press [TUNE / ] to switch to "Reset? Yes" option.
3 To select "Reset? No" or "Reset? Yes", press [ENTER] while at the desired
option. Selecting "Reset? Yes" will cause the DB1 to be reset to its factory
default settings.
OPERATION
] to select "Manual Scan". Press
/ ] to step through the
] when you have arrived at your
] to select "Prune List".
] to select "Reset".