Num'axes PROTECTION PIE1077 User Manual page 21

Before inserting or removing the memory card, the camera must be turned off
(switch in the OFF position). Failing to do so may cause loss of or damage the files
already recorded on the card.
Formatting the memory card in the trail camera before using it for the first time is
strongly recommended, especially when the card has been used in other devices. A
memory card formatted in another device may not be compatible.
In ON mode, if no memory card is inserted, the LDC screen displays "No memory
card".
When the memory card is full, the LCD screen indicates "Memory full".
5. Operation
5.1. Turn ON the camera
Put the switch in the ON position to turn on the camera.
The start-up indicator light located on the front cover will blink in blue and the LCD
display will count down 10 seconds. This interval allows you time to close the camera
front cover and leave the monitored area.
Once in the ON mode, the camera will take photos and/or videos according to its
current parameter settings.
NOTE: the camera comes pre-programmed with factory default settings. So, for test
purpose, you only need to insert the memory card and AA batteries then power on
the camera (switch in the ON position).
5.2. Turn OFF the camera
Slide the switch to the OFF position to turn off the camera.
Please note that even in OFF mode, the camera still consumes power at a very low
level. Therefore, please remove the batteries if the camera will not be used for a long
time period.
The OFF mode is the "safe mode" for actions such as replacing the memory card
replacing the batteries or transporting the camera.
5.3. Mobile app and Wi-Fi connexion
The Wi-Fi function works with a free mobile app available for Android and iOS.
App name: TrailCam Go
Guide PIE1077 – Septembre 2024 – ind. B - 21/96