Mitsubishi Electric LaserVue L75-A91 Owner's Manual page 80

78
Appendices
Appendix E: Troubleshooting, continued
Reset Name When to Use
Lock Menu To change your Lock
Pass Code menu pass code
Control-Panel To re-enable the
Lock Release control-panel buttons
after activation of the
Control-Panel Lock
Auto Input If the New Device
Sensing for Found screen does
HDMI not appear when you
connect an HDMI
device.
System Reset
If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
TV Reset To reset all consumer-
accessible settings
IMPORTANT:
and all memories to
Use this reset
the original factory
only if other
defaults.
troubleshooting
has been unsuc- Use TV Reset if the TV
cessful. can respond to con-
trols but TV behavior is
abnormal.
CAUTION: All owner-
performed setups and
adjustments will be
erased.
VUDU
• VUDU does not
™
Reset VUDU
respond to commands.
Connection
• The selection does not
(L75-A91) play (e.g., screen is
black or the "Loading"
message is frozen on
screen).
VUDU You have forgotten
Reset VUDU your account pass-
Account word.
Password
(L75-A91)
VUDU You have forgotten
Reset Parental your pass code.
Controls Pass
code
(L75-A91)
In Canada call 1(800) 450-6487 for assistance.
How to Use
See the cutout page from Appendix B,
page 71.
Press and hold the ACTIVITY button on
the control panel for ten seconds. If
the TV is powered off, you can now
press the POWER button to turn it on.
1. Disconnect the HDMI device.
2. Delete the HDMI input in the
Inputs > Name menu (see page
45).
3. Power on and connect the new
device.
Press and hold the POWER button on
the control panel for ten seconds.
1. While viewing the TV, press
MENU to display the TV main
menu.
2. With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3. READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
• If you do not wish to use this
reset, press BACK or MENU to
back out.
• If you do wish to use the
reset, press ENTER to erase
all memories and settings.
1. MORE Key.
Press the
2. 2 key.
Press the
Using a computer, go to
www.VUDU.com.
Call VUDU Customer Care at
1-888-554-VUDU (8838).
Resulting Action
Allows establishment of a new
code.
Allows the control panel to be
unlocked if the remote control is
misplaced.
The New Device Found screen
will display.
The TV will turn off. Power on the
TV and the green LED will flash
quickly for about one minute. The
changes you made most recently,
before using SYSTEM RESET, may
be lost.
The TV will start the initialization
process and then turn off.
Power on the TV and the front
green LED will start flashing. All
memory and settings outlined in
this Owner's Guide will need to
be set again.
The screen will briefly go blank
while VUDU initializes.
This reset does not reset the TV
or any TV settings.
Reset your account password
from the VUDU website (requires
access to e-mail).
VUDU Customer Care will reset
your pass code.