Mitsubishi Electric LaserVue L75-A91 Owner's Manual page 46

44
4. TV Menus
Initial, continued
Channel Ant Air,
Ant Cable
Scan
(Channel
Manage-
ment)
Edit
Notes on Scan and channel memorization
• Channel memorization may take up to 15 minutes
to complete.
• To stop channel memorization before completion,
press CANCEL. Channels already added are retained.
• When watching TV, press CH
memorized channels.
• To add a digital channel that does not appear in the
Edit menu without repeating channel memorization:
1.
Look up the physical channel number for
the new digital channel. See the website
www.antennaweb.org for help.
2. ACTIVITY and select the ANT input.
Press
Adding/Deleting Channels Using the Channel Edit Menu
• Channels marked with a check are in memory.
• To add or delete a channel from
• To add a single digital channel not in the list, see the notes under
• Digital channels are listed by virtual channel number with the physical channel number shown in small gray text.
See below for an explanation of these terms.
- Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the
virtual number is associated with the corresponding analog channel number. For example, a broadcaster may
associate digital channel 2-1 with their analog channel 2.
- Physical Digital Channel Number.
shown on screen in gray text.
Energy Energy
Usage
In Canada call 1(800) 450-6487 for assistance.
You must perform a channel scan to receive digital channels. Scan searches for broad-
cast channels and adds them to TV memory. To start channel scan:
1. Highlight one of the input selections based on your connection to the
• Air when connected to an indoor or outdoor antenna.
• Cable when connected to direct cable (no cable box)
2. Press to highlight SCAN.
3. Press ENTER to start channel memorization.
After channel scan, Edit lets you add and delete individual channels from memory.
• Press ENTER to add or remove checks.
• Press PAGE DN/UP to jump to the next or previous page of channel numbers.
• Press to move through all channel numbers, one at a time.
to move through
memory, highlight the channel number and press ENTER.
The channel number officially assigned to the actual broadcast frequency;
Standard,
Options for power consumption while the TV is powered off.
Fast Power
• Standard
On
lines while powered off.
• Fast Power On
while in the off state in excess of ENERGY STAR guidelines for a
powered-down device.
3. Use the number keys and
the physical channel number followed by "-1"
and ENTER. For example, for physical channel
36, press
3 6
The TV will search for a digital channel on the channel
36 frequency. When it finds the channel, it will:
a. Add the channel to memory.
b. Change the channel number to the virtual
channel number sent by the broadcaster.
c. Add to memory any associated sub-
channels.
• Rememorize channels if you move the TV to a differ-
ent geographic area with a different channel line-up.
Scan on this page.
keeps the TV's energy use within ENERGY STAR ® guide-
lets the TV power up quickly. The TV uses power
ANT input:
CANCEL key to enter
ENTER.
1