Using Tv Features; Selecting An Input; Sleep Timer - Mitsubishi Electric LaserVue L75-A91 Owner's Manual

3

Using TV Features

Selecting an Input

The Activity menu lets you switch TV inputs. If you named
devices during Auto Input Sensing, the inputs are organized
into groups based on possible ways to use each device.
Dots indicate the number of devices in each group.
Your setup may have only one group (Watch TV).
1.
Press the ACTIVITY key.
2.
Use to move through groups of TV inputs.
3.
Use to select an input.
4.
ENTER to switch to the input.
Press
• To change the list of inputs shown in each activity group,
see Inputs > Activity, page 45.
• To assign or change the names of input icons, use the
Inputs > Name menu, page 45.

Sleep Timer

The Sleep Timer turns the TV off after the length of time you set.
To set the TV to turn on at a certain time of day, see the Initial > Timer menu on page
43.
Setting the Sleep Timer
1.
Press MORE on the remote control. The TV's MORE menu will display.
2.
CANCEL (SLEEP) repeatedly to increase the time in 30-minute increments.
Press
The maximum is 120 minutes.
3.
BACK or wait five seconds without pressing any keys for the message to dis-
Press
appear.
Viewing the Sleep Timer
Press INFO to see the time remaining on the Sleep Timer.
Note:
In the U.S. call 1(877) 675-2224 for assistance.
SLEEP
With the MORE menu
displayed, press the
CANCEL key on the
remote control to
activate/deactivate the
Sleep feature.
25