Adjust - Mitsubishi Electric LaserVue L75-A91 Owner's Manual

38
4. TV Menus

Adjust

To make picture adjustments:
• From the
1. Press
Picture
2. Press
While watching TV:
•
then 8 (VIDEO) in the on-screen menu. Press
Super
Brilliant
Brilliant
Game
Picture
Bright
Mode
Natural
Cinema
Special
ISF Day,
ISF Night
• Low contrast shows a variety of shades in darker images
• In most home lighting situations, medium contrast looks best.
Contrast
• High contrast shows darker images more uniformly black and
makes colors appear more vibrant. High contrast is good for
brightly lit environments.
Brightness Adjusts overall picture brightness. Settings are stored independently for each Picture Mode.
Color Adjusts overall color intensity from no color to fully saturated.
Tint Adjusts the red-to-green ratio.
Sharpness Adjusts picture detail and clarity.
High
Color
Temp
Low
High,
Video Medium,
Noise Low, Off
On, Off
EdgeEnhance
On, Off
DeepField
Imager
Demo
In Canada call 1(800) 450-6487 for assistance.
Adjust > Picture menu:
to highlight an option.
to adjust.
Press the MORE key and
The Super Brilliant Picture Mode is designed to compensate for the
harsh, bright lighting used in retail settings and is not recommended for
home use. Prolonged use of the Super Brilliant Picture Mode will age
the lasers faster, reducing picture brightness as the TV ages.
For use under bright light. May be too bright for most home lighting;
unavailable when the current input is named Game or PC.
Optimizes picture and video processing for gaming consoles.
Available only when the name of the input is Game or PC.
For most daytime viewing under natural light; good for x.v.Color
sources
For most nighttime viewing under dim to moderate lighting; good for x.v.Color sources
For use with theatrical movies; recreates the color gamut seen in theaters. Good for movie
viewing in moderate to dim lighting.
Advanced Picture Modes. Contact your professional installer for setup or see
"Advanced Picture" on page 41.
L75-A81: Special/ADV
L75-A91: ISF Day/ADV1, ISF Night/ADV2
Gives white images a cool cast. May provide the most realistic
picture under bright lighting.
Gives white images a warm cast. This setting displays video at
approximately the 6500K industry standard for NTSC pictures.
High.
• For poor-quality signals.
Medium.
• For moderate noise reduction.
Low.
• For good-quality signals.
Off.
• Leaves the picture unaltered.
EdgeEnhance™ adds special edge enhancements to make the image appear sharper.
Saved by input.
DeepField™ Imager dynamically enhances black levels in portions of the screen to
provide strong contrast with detail over mixed screen content.
For comparison, displays a split picture to show On (right side) and Off (left side).
to select the video option you want to change.
Press to change settings.
Assign names to TV inputs before making video adjust-
ments (New Device Found or Inputs > Name menu).
Adjustments will be reset to the defaults if you name or
rename inputs afterwards.
Adjusts the white-to-black level
Settings are stored indepen-
dently for each Picture Mode.
Adjusts the white
balance. Settings are
stored independently for
each Picture Mode.
Reduces minor noise (graininess) in the
picture. Saved by input. Not available if
the current input is named PC or Game or
when 3D is active.
Set the Picture Mode
first before changing
other video settings,
as some settings are
stored independently
for each Picture
Mode. Use Picture
Modes to get the best
image under different
viewing conditions.