Mitsubishi Electric LaserVue L75-A91 Owner's Manual page 61

Setting Up A/V Receiver Control, continued
Case 2: Automatic A/V Receiver Switching
to a Surround Sound Device
Note: Use this setup to send digital surround sound
from a source device directly to your external sound
system. For non-surround sound source devices,
Mitsubishi recommends using the setup for Case 1,
in which audio is sent through the TV.
A device can send digital surround sound such as Dolby
Digital or DTS directly to the A/V receiver. The device might
be a DVD player, cable box, or satellite receiver, and could
Digital Surround Sound
have HDMI output. A DVD player is used in this example.
Your setup may include additional devices with digital
surround sound connected directly to the A/V receiver.
These devices might be a DVD player plus a cable box
or satellite receiver. Inputs already connected to the TV
will appear listed in the setup screen.
DVD Player
digital surround sound
with
Digital
o Surround
video
Sound
Case 2: A/V receiver audio from a device providing
surround sound directly to the A/V receiver
1.
In the Inputs > AVR > NEXT menu, press
to highlight the name of the A/V receiver input to
control. In this example, it is the DVD input.
2.
ENTER on the TV's remote control.
Press
Combining Setup Types
Your setup can include devices connected
using the Case 1 method plus other devices
connected using the Case 2 method.
6. NetCommand Control of an A/V Receiver
DVD Player with
DVD audio
input
A/V Receiver
TV
digital surround sound
Case 2: NetCommand setup for
controlling A/V receiver switching
to the A/V receiver's DVD input. The list contains
connected inputs with names assigned during Auto
Input Sensing.
3.
While the text
DVD INPUT key on the A/V receiver's remote control.
4.
When a check appears next to
DVD INPUT key.
• If the text stops flashing before the check mark
appears, repeat this step.
• To erase the IR code just "learned," press
CANCEL while the name is highlighted.
5.
If finished, highlight
continue to set up additional A/V receiver audio
sources.
In the U.S. call 1(877) 675-2224 for assistance.
DVD is flashing, press and hold the
DVD, release the
EXIT and press ENTER or
59