1. Basic Setup and Operation
TV Controls and Indicators, continued
LED Color TV Condition
TV is powered off.
TV is powered on.
TV powered off, auto-on TV Timer is set.
TV power just turned on.
TV just plugged into AC outlet.
AC just restored after power failure.
TV is rebooting after power fluctua-
tion or receiving abnormal digital
signals from a digital channel or
You have begun the procedure to
update software from an authorized
flash memory device.
TV is too hot.
TV may require service.
In Canada call 1(800) 450-6487 for assistance.
Normal operation. TV can be turned on at any time.
Normal operation. A picture will appear shortly.
Wait approximately two minutes for blinking to stop before
turning on. Normal operation.
The TV will display a warning message and shut off if it over-
• Ambient room temperature may be too high. Turn off
the TV and let the room temperature drop.
• Clear blocked air vents. Ensure at least a four-inch
clearance on all sides of the TV.
Turn off the TV and unplug the set from the AC power
source. Wait one minute and then plug the set back in. See
If the LED is still on, contact Mitsubishi to receive Authorized
Service Center information:
U.S.A. Go to www.mitsubishi-tv.com or call 1-877-675-2224.
Canada. Go to www.MitsubishiElectric.ca or call