Y Pb Pr Component Video Device; Hdmi Device - Mitsubishi Electric LaserVue L75-A91 Owner's Manual

Y Pb Pr Component Video Device

HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
If your source device has an HDMI output, use the
connections for HDMI devices described on this page
instead of Y Pb Pr component video.
Required:
1. RCA-type component video cables
2. Left/right analog audio cables.
Note: To hear digital surround sound, connect the digital
audio output from the device directly to your digital
A/V receiver.
TV
panel
INPUT 1 INPUT 2
Incoming from
cable service or
satellite dish
3.
1.
2.
1.
Y Pb Pr L
R
AUDIO
Any device with com-
ponent video output
CABLE IN or
SATELLITE IN
1.
2.
2. TV Connections

HDMI Device

HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel to the
HDMI device output. HDMI devices provide video and
audio through the single cable.
Mitsubishi recommends you use category 2 (high-
speed) HDMI cables to connect HDMI 1.3 source
devices. High-speed category 2 cables bring you the
full benefits of Deep Color and x.v.Color. See "HDMI
Cable Categories" on the opposite page for more on
HDMI cable types.
Any device with
HDMI output
IMPORTANT
HDMI and Audio Signals
Digital Surround Sound: The TV's HDMI inputs
can receive digital stereo audio signals only. To
hear digital surround sound from an HDMI device,
connect the device's HDMI or digital audio output
directly to your A/V receiver. See the Owner's
Guides for those devices for instructions.
In the U.S. call 1(877) 675-2224 for assistance.
TV
panel
INPUT 1 INPUT 2
21