Mitsubishi Electric LaserVue L75-A91 Owner's Manual page 15

Setting Up TV Inputs, continued
About Auto Sensing
This TV's Easy Connect™ Auto Sensing feature
detects most connections automatically. The excep-
tions are:
• A connection on the
• An HDMI device that is powered off. Power on
the device to ensure detection.
Auto Input/Auto Output Sensing for Most Devices
When you first connect a device, the TV will:
a. Detect the connected device and automati-
cally switch to it.
b. Prompt you to identify the device type.
c. L75-A91. Prompt you to perform NetCom-
mand set-up for the device, if available.
d. Repeat these steps for other newly detected
devices.
When You First Connect a Device
Most Device Types.
•
the on-screen list. The device type you select
here will appear as a device icon in the Activity
menu.
• A/V Receiver
- T he TV can detect audio connections on the
DIGITAL AUDIO OUTPUT jack (orange) and the
right (red) AVR AUDIO OUTPUT jack.
- For an HDMI A/V receiver, select
the list of device types if the A/V receiver is
not recognized automatically.
HDMI CEC Devices Compatible with the TV's
•
HDMI Control Feature. Compatible CEC-
enabled HDMI devices are often recognized auto-
matically by the TV. HDMI Control may allow you
to control some functions of a CEC-enabled device.
See Appendix C, "HDMI Control of CEC Devices."
ANT input
Select the device type from
AVR from
1. Basic Setup and Operation
New Device Found screen for a device with HDMI
control enabled. Select On to enable the TV's CEC
control of the device. In some cases, as in the
example above, you will also be prompted to select a
device name.
Tips on Auto Sensing
• Choose a different name for each input.
• The antenna input (
although you can turn off the unused antenna
input in the Inputs > Name menu.
• Change the device type displayed in the
menu by using the Inputs > Name menu (page
45).
L75-A91.
• Any "learned" NetCommand IR codes
will be erased if you change the device type in
the Inputs > Name menu.
Reactivating Auto Input Sensing
for an HDMI Input
When you disconnect an HDMI device, Auto Input
Sensing is disabled until you perform these steps.
1.
Disconnect the HDMI device.
2.
Delete the removed HDMI device in the
Name menu (see "Removing an HDMI Device,"
page 75).
3.
Connect the new device and the
Found screen will display.
In the U.S. call 1(877) 675-2224 for assistance.
ANT) is never detected,
Activity
Inputs >
New Device
13