Microtek ScanMaker 6100 Pro User Manual page 43

Note: This command can be used only in applications (such as
Adobe Photoshop) that allow you to retain the scan module after a
scan is completed. Some applications may not retain the scan
module even if this option is enabled.
To use this feature:
Choose the command Retain Scan Module after Scan in the
Preferences menu. A check (v) appears next to the command when
it is enabled. If you wish to see the scanned image in your image-
editing software after scanning is completed, you will need to quit
ScanWizard 5 to see the image.
More... command
The More... command lets you specify, miscellaneous parameters.
Keep Overview Image
If checked, the image which is prescanned in the Overview
command remains on the screen until the next image acquisition is
performed. If unchecked, the overview image is deleted when you
exit ScanWizard 5.
Keep All Prescan Images
If checked, the image which is prescanned in the Prescan command
remains on the screen until the next image acquisition is performed.
If unchecked, the prescanned image is deleted when you exit
ScanWizard 5.
Confirmation Message
(for Windows only)
If checked, a confirmation message appears when image effects
such as Rotate or Flip are applied. If unchecked, no confirmation
message appears.
Smoked Glass Background