Microtek ScanMaker 6100 Pro User Manual page 158

1. Select and double-click a folder from the left column.
2. Click the Add button to add highlighted or selected templates,
or click the Add All button to add all the Scan Job Queue
templates in the folder.
Note: You may also add individual Scan Job Queues to the Scan
Job Queue list.
To save Scan Job Queues as a template:
1. Select and double-click a folder from the left column.
2. Highlight the Scan Job Queue to be saved from the right
column.
3. Click the Save button (located between the two columns). The
selected Scan Job Queue is saved as a template to your
selected folder.
To remove Scan Job Queue(s) from the queue:
1. Highlight the Scan Job Queue(s) to be removed from the right
column.
2. Click the Remove or Remove All button located at the
bottom of the dialog box.
To close the dialog box:
Click the OK button (located at the bottom of the dialog box).
If you remove all Scan Job Queues in the queue and close the
dialog box, you will be informed that a default scan will be
automatically created, or you will prompted to return to the dialog
box to manually enter at least one Scan Job Queue. This is because
there should always be at least one Scan Job Queue in ScanWizard
5.