White/Black Points Setup - Microtek ScanMaker 6100 Pro User Manual

saturated colors. If the "None" option is selected, the scanned
image will appear like the original, with no color enhancement
applied.
Info/Profile Information button
This lets you get information on currently used ICC profiles.
Preview check box
(for Macintosh only)
This immediately updates the Preview window image when a new
color profile is selected. This will reflect colors consistent with the
newly selected profile.

White/Black Points Setup

The White Point is a reference point that specifies the lightest area
in an image. The Black Point is the darkest reference area.
Auto White Point Clipping
This lets you set the percentage of pixels in the highlight region to
be truncated. Effective only when "Auto White/Black point" option is
selected in the AIC dialog box.
Auto Black Point Clipping
This lets you set the percentage of pixels in the shadow region to be
truncated. Effective only when "Auto White/Black point" option is
selected in the AIC dialog box.
Minimum Output level
This lets you set the minimum output level of the Black Point. The
higher the percentage value, the lower the contrast.
Maximum Output level
This lets you set the maximum output level of the White Point. The