lower the percentage value, the lower the contrast.
Cursor Auxiliary Lines
This command allows you to create horizontal and vertical grid lines
with your cursor to help define a scan frame precisely. Using the
grid lines, you can also read the measurements of your ruler more
easily.
To use this feature:
1. Choose the Cursor Auxiliary Lines command in the
Preferences menu. From the submenu that appears, select
how the cursor lines will appear.
On both x (horizontal) and y (vertical) axes
On x axis only
On y axis only
None (no cursor lines)
2. Click on the Scan Frame tool.
To see how the cursor lines work, draw a scan frame.
Click on the top left corner of the image as your starting
point, then drag down diagonally to form a scan frame.
As you draw the scan frame, cursor lines will appear to
help you draw the scan frame precisely. When you
release the mouse, your scan frame will be aligned with
the cursor lines.
Overview Setup
This command lets you set the area you want to be overviewed of
the scan bed, and provides some overview options as well.
By default, ScanWizard 5 overviews the maximum scan area as