Table of Contents
Advertisement
Quick Links
Bellows I
Installation Guide
For Models:
BW116AG3
BW116SS3
3170356
APPROVED FOR USE
IN DAMP LOCATIONS
net weight of fan: 13.73 lb (6.23 kg)
READ THESE INSTRUCTIONS AND
SAVE THEM FOR FUTURE USE
Table of Contents:
Safety Tips. pg. 1
Unpacking Your Fan. pg. 2
Parts Inventory. pg. 2
Installation Preparation. pg. 3
Installation of Fan. pg. 4
Wiring. pg. 5
Testing Your Fan. pg. 6
Troubleshooting. pg. 6
Warranty. pg. 6
Parts Replacement. pg. 6
PRINTED IN CHINA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Craftmade BW116SS3
Summary of Contents for Craftmade BW116SS3
-
Page 1: Table Of Contents
READ THESE INSTRUCTIONS AND SAVE THEM FOR FUTURE USE Bellows I Installation Guide For Models: BW116AG3 BW116SS3 Table of Contents: Safety Tips. pg. 1 Unpacking Your Fan. pg. 2 Parts Inventory. pg. 2 Installation Preparation. pg. 3 Installation of Wall Bracket. pgs. 3 - 4 Installation of Fan. -
Page 2: Safety Tips
SAFETY TIPS. WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE INSTRUCTIONS. -
Page 3: Unpacking Your Fan
1. Unpacking Your Fan. Carefully open the packaging. Remove items from Styrofoam inserts. Remove fan assembly and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam inserts should this fan need to be returned for repairs. -
Page 4: Installation Preparation
3. Installation Preparation. To prevent personal injury and damage, ensure that the hanging location allows the fan a clearance of 7 feet (2.13m) from the floor to 7 feet prevent accidental contact with the fan blades. (2.13m) This fan can only be mounted on an INDOOR wall or on an ENCLOSED porch or ENCLOSED patio wall. -
Page 5: Installation Of Fan
4. Installation of Wall Bracket. (cont.) pilot holes stud First determine the approximate position of 1/4" where you want the fan to be located on the (6.5mm) mounting wall. [Remember that the fan must be mounted hole at least 7 feet (2.13m) from the floor.] Then, locate the stud in the wall. -
Page 6: Wiring
6. Wiring. Make sure all electrical connections comply with Local Codes or Ordinances and the National Electrical Code (or the Canadian Electric Code). If you are unfamiliar with electrical wiring please use a qualified electrician. Insert power cord securely into proper wall outlet. WARNING: The power cord is equipped with a three-prong grounded plug that must be inserted fan assembly... -
Page 7: Testing Your Fan
Return fan, shipping prepaid, to oscillation function with the wall control on the Craftmade/Ellington. We will repair or ship you a right side. Start at the "Off" position and turn replacement fan, and we will pay the return shipping cost.
Need help?
Do you have a question about the BW116SS3 and is the answer not in the manual?
Questions and answers