Playback In Zone2 (Separate Room); Zone2 Playback By Speaker Output; Zone2 Playback By Audio Output; Panel Lock Function - Marantz SR5005 User Manual

Panel lock function

To prevent accidental operation of this unit, you can disable operation
of the buttons on the front panel.
ON/STANDBY AUTO RETURN
ENTER
p
n Disabling all key button operations
Press ON/STANDBY while you press and hold
ENTER
with the unit in standby mode.
"Panel Lock:ON" appears on the display and all button operations
ON/STANDBY
except are disabled.
n Disabling all button operations except VOLUME
ON/STANDBY
Press while you press and hold
with the unit in standby mode.
p
"Panel Lock:ON" appears on the display and all button operations
ON/STANDBY VOLUME
except and are disabled.
n Canceling the Panel lock function
ON/STANDBY
Press while you press and hold
RETURN with the unit in standby mode.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit
using the remote control unit.
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Convenient functions

Playback in ZONE2 (Separate room)

• You can operate this unit so as to enjoy audio in a room (ZONE2)
other than the MAIN ZONE (room where the unit is located).
• You can simultaneously play back the same source in both the MAIN
VOLUME
ZONE and ZONE2. You can also play back separate sources in the
MAIN ZONE and ZONE2.
• There are two methods to do this, as described below. Choose one
of the methods.
q ZONE2 playback by speaker output
w ZONE2 playback by audio output (PRE OUT)
(using an external amplifier)
q ZONE2 playback by speaker
output
The ZONE2 audio signals are output from this unit's SURR.BACK/AMP
ASSIGN speaker terminals using the amplifier assignment function.
AUTO and
Connecting and setting the speakers
"Amp Assign" setting
(vpage 56) and audio
signals output
AUTO
and
AUTO
and
ZONE2
Output signal :
Stereo (L / R)
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
w ZONE2 playback by audio output
The audio signals connected to this unit's ZONE2 output terminals
(ZONE2 OUT) are output to the ZONE2's amplifier and played with
that amplifier.
Connection (ZONE2)
Connecting the speakers
MAIN ZONE
This unit
ZONE2
• We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
• Also be sure to read the operating instructions of the connected
devices.
NOTE
It is not possible to play the digital audio signals input from the
HDMI, COAXIAL or OPTICAL terminals in ZONE2. Play using analog
connections (in stereo).
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
MAIN ZONE
L
R
This unit
ZONE2
L
R
AUX
IN
ENGLISH ENGLISH
41