Connections; Important Information - Marantz SR5005 User Manual

Connections

Important information

• Make connections as follows before using this unit. Select an appropriate connection type
according to the components to be connected.
• You may need to make some settings on this unit depending on the connection method. Refer to
each description for more information.
• Select the cables (sold separately) according to the components being connected.
Converting input video signals for output (Video conversion function)
This unit is equipped with three types of video input connector (HDMI, Component video and video) and
three types of video output connector (HDMI, Component video and video).
Use the connectors corresponding to the components to be connected.
This function automatically converts various formats of video signals input to this unit into the formats used
to output the video signals from this unit to a monitor.
GFlow of video signalsH
Video device
Input
(IN)
Output
HDMI connector HDMI connector
Component video Component video
connectors connectors
Video connector Video connector
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
This unit
Monitor
Output
(MONITOR OUT)
Input
HDMI
HDMI connector
connector
Component video Component video
connectors connectors
Video connector Video connector
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components being
connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.
• The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60
formats.
• Resolutions of HDMI-compatible TVs can be checked at "HDMI Monitor Information" (vpage 61).
NOTE
• HDMI signals cannot be converted into analog signals.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
• Component video input signals cannot be converted into Video format.
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH ENGLISH ENGLISH
13