Marantz SR5005 User Manual page 18

About ARC (Audio return channel) function
The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data
"upstream" to this unit.
NOTE
• To enable the ARC function,set "HDMI Control" to "ON" (vpage 58).
• When connecting a TV that does not support the ARC function, a separate connection using an audio
cable is required. In this case, refer to "Connecting a TV" (vpage 16) for the connection method.
About Content Type
The HDMI Specification Version 1.4a enables simple, automated picture setting selection with no user
intervention.
NOTE
To enable the Content type, set "Video Mode" to "Auto" (vpage 49).
Cables used for connections
Audio and video cable (sold separately)
HDMI cable
• This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.
Blu-ray Disc
DVD player
player
HDMI HDMI
OUT OUT
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Game
Set-top box TV
console
HDMI HDMI HDMI
OUT OUT IN
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
• When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an
HDMI cable.
• When connecting a device that supports Deep Color transmission, please use a "High Speed HDMI
cable" or "High Speed HDMI cable with Ethernet".
• Video signals are not output if the input video signals do not match the monitor's resolution. In this case,
switch the Blu-ray Disc/DVD player's resolution to a resolution with which the monitor is compatible.
• When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with
HDMI audio signal playback, only the video signals are output to the monitor.
NOTE
The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be
limited by the HDMI audio specifications of the connected device regarding permissible inputs.
Connecting to a device equipped with a DVI-D connector
When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to
DVI signals, allowing connection to a device equipped with a DVI-D connector.
NOTE
• No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio
connections.
• Signals cannot be output to DVI-D devices that do not support HDCP.
• Depending on the combination of devices, the video signals may not be output.
n Settings related to HDMI connections
Set as necessary. For details, see the respective reference pages.
Input Assign (vpage 48)
Set this to change the HDMI input connector to which the input source is assigned.
HDMI Setup (vpage 58)
Make settings for HDMI video/audio output.
• Auto Lip Sync
• HDMI Audio Out
• HDMI Control
• Standby Source
• Power Off Control
NOTE
The audio signals output from the HDMI connectors are only the HDMI input signals.
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
Connecting an HDMI-compatible device
ENGLISH ENGLISH
15