Advanced Bionics CPI-3 Instructions For Use Manual page 4

Connecting the Programming Cable
• Connect the Programing Cable to the CPI-3 (CI-6101) by plugging in the Micro
HDMI Connector
• Connect the processor to the programming cable
• Slide the Harmony and Auria Connector onto the sound processor and engage
the cable lock
• Verify that the processor appears in the SoundWave™ hardware tree
NOTE: Do not attempt to service or modify the Naida CI or its accessories. Doing
so may compromise system performance and will void the manufacturer's warranty.
Products should be serviced only at Advanced Bionics.
Recommended Operating and Storage Temperature Ranges
Condition
Operating Temperature
Storage Temperature
2
Minimum Maximum
15°C (59°F) 30°C (86°F)
-20°C (-4°F) 55°C (131°F)