Use this menu to specify your settings for Power Management. Remember that the
options available depend upon the hardware installed in your system.
Resume On M odem Ring
Select [On] to wake up the system when an incoming call is detected on the modem.
Options: [On], [Off].
Resume On Time
Select [On] to wake up the system at predetermined time. Options: [On], [Off].
Resume T ime
The time format is <HH> <MM> <SS>.
Resume Date
The date format is <MM> <DD> <YYYY>.
Resume On LAN
Select [Enabled] to wake up the system when incoming signals is detected on the
specified LAN devices. Options: [Enabled], [Disabled].
After Power Failure
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Stay Off]
[Power On]
[Last State]
Power
Returns the system to an off state.
Returns the system to a full on state.
Restores the system to the previous status before power
failure or interrupt occurred.
BIOS Setup
4-17