If The Sealer Doesn´t Start - Conroy Qseal-extra Operator's Manual

Caution! In case of sealer malfunction (intermittent operation, poor seal quality, the sea-
ling time seems too long or too short) contact your local Conroy Medical
representative for assistance.
Caution! Periodically check the pattern of the sealing visually (see picture below).
4.3 If the Sealer Doesn´t Start
The Sealer has several safety functions. Before sealing, these functions control and iden-
tify whether it is possible to seal the tube. The table below covers the common probable
causes for problems and suggests some recommended actions.
Probable cause
Wet tube
Tiny arcs between the electrodes
Wet or dirty electrodes
If the sealer still doesn't start, see chapter 6 for further information.
22
Good sealing pattern
Recommended action
Dry the tube and try again
Dry the electrodes and try again
Clean and dry the electrodes
Bad sealing pattern
CS624 Qseal-extra Operator´s manual