MSI KT6 Delta-FIS2R User Manual page 75

MS-6590 ATX Mainboard
For better PCI performance, you should set the item to higher values. Settings
range from 32 to 248 at a 32 increment.
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: Disabled, Enabled.
Primary Graphics Adaptor
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
AGP
PCI
PCI Slot1 IRQ, PCI Slot2/5 IRQ, PCI Slot3 IRQ, PCI Slot4 IRQ
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7, 9,
10, 11, Auto. Selecting Auto allows BIOS to automatically determine the IRQ
line for each PCI slot.
3-22
The system initializes the installed AGP card first. If the
AGP card is not available, it will initialize the PCI VGA
card.
The system initializes the installed PCI VGA card first.
If the PCI VGA card is not available, it will initialize the
AGP card.