BOSS ILLUMINATION AERO Product Manual

AERO
STREET LIGHT
PRODUCT SPECIFICATIONS
Input Voltage : 220-240V AC
Operating Temperature : -10 to 40°C
Material : Aluminium
60mm 65
IP
PARTS INCLUDED
x1
LED 1.5m Cable
Pole Mount
Luminaire
Spigot
OPTIONAL COMPATIBLE PARTS sold separately
Wall Mount
Spigot
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
11.23
2023
©
V
COPYRIGHT BIA
08
IK
x1
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modified, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.
PRODUCT VARIANTS
Power : 60W
150W
Dimming: No
1-10V
Beam Angle : Type II
Type III
Type V
ADDITIONAL INFORMATION
1-10V dimmable option available. These cables must be
1.
terminated if not in use.
Photocell attachment is an optional upgrade.
2.
If cleaning maintenance is required, disconnect from mains
3.
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
Care must be taken during installation and maintenance to
5.
prevent accidental damage to the surface of the luminaire.
These damages may result in corrosion.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting