Siamp OPTIMA 50 Assembly Instructions

Hide thumbs Also See for OPTIMA 50:

Download this manual

N 50

Overﬂ ow

Short

ﬂ ush cursor

Valve gasket

Strainer gasket

Pan gasket

OPTIMA

Réf. 50 5531 00 B

Button

Short ﬂ ush

Long ﬂ ush

Cable

Optional escutcheon

(not always supplied)

Button nut

Dead water

sliding valve

Strainer

Strainer nut

ASSEMBLY INSTRUCTIONS

Need help?

Do you have a question about the OPTIMA 50 and is the answer not in the manual?

Page 1 Button Short ﬂ ush Long ﬂ ush N 50 Optional escutcheon (not always supplied) Button nut Overﬂ ow Cable Short ﬂ ush cursor Dead water sliding valve Valve gasket Strainer Strainer gasket Strainer nut Pan gasket OPTIMA ASSEMBLY INSTRUCTIONS Réf. 50 5531 00 B...
Page 2 Do not use any sealing paste I - INSTALLATION Position the mechanism in the cistern and secure it in place with the nut (g) Manually screw the flush valve nut (g) until it is in contact with the ceramic. If necessary give an extra quarter turn (maximum) with the appropriate spanner.
Page 3 2 - Do not use any sealing paste and/or compound in any case would not be covered by the guarantee. Ensure tightness of connection to cistern with filter gasket. SIAMP will be not responsible in case these warnings are not respected.
Page 4 Siamp Monaco : 4, quai Antoine 1 - BP 219 - MC 98007 MONACO Cedex Fax : 00 377 92 05 71 04 - E-mail: contact@siamp.com - Web : www.siamp.com Siamp Ltd, Unit C2, Meadowbank Business Park Tweedale Way, Hollinwood, Oldham, Greater Manchester, OL9 8EH Tel : 0161 681 2120 - Fax : 0161 681 2130 Email : aftersales@siamp.co.uk - Web : www.siamp.co.uk...