Input Setup - Lexicon MC-8 User Manual

Setup

INPUT SETUP

SETUP INPUTS DVD1

INPUT SETUP

Selecting the SETUP menu INPUTS option prompts the selection of a desired input (e.g., DVD1). Selecting an input opens the corresponding
INPUT SETUP menu, which is used to change the input name, assign audio and video input connectors, select preferred listening modes and
configure advanced Main Zone and Zone 2 input settings.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP
menu can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
All INPUT SETUP menus are shown in the Appendix on page A-6. The parameters on the left side of the INPUT SETUP menus are identical,
regardless of which input is selected. The parameter settings on the right side are adjustable. Default parameter settings differ from input to input.
The INPUT SETUP menus shown in the Appendix indicate factory-default parameter settings for each input.
3-4
SETUP INPUT SETUP
INPUTS DVD1
SPEAKERS DVD2
REAR PANEL CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER CD
LOCK OPTIONS
TUNER
LIVE! CALIBRATION
AUX
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-Video-1
COMPONENT IN 1
2-CH FILM
D 5.1 FILM
FILM
MIC LIVE! MED
MAIN ADVANCED
ZONE2 IN DIGITAL
Lexicon